MARBERO Portable Power Stations Buy Together MODEL M82(80W
237Wh nameplate capacity
Check current availabilityPrice and stock are shown by the retailer.Specs-based comparison
MARBERO M82 Bundle vs Anker SOLIX C300
Start with your largest appliance and required runtime. The specification differences below show which unit is the closer fit.
2026 specification snapshot
Anker SOLIX C300 Portable Power Station with Adjustable Strap
288Wh nameplate capacity
Check current availabilityPrice and stock are shown by the retailer.Quick verdict
The decision in one minute
The capacities are relatively close, so AC output is the sharper separator: Anker SOLIX C300 Portable Power Station with Adjustable Strap supports the larger published load.
Capacity leader: Anker SOLIX C300 Portable Power Station with Adjustable Strap Portability leader: MARBERO Portable Power Stations Buy Together MODEL M82(80W AC output leader: Anker SOLIX C300 Portable Power Station with Adjustable Strap
Specs-based comparison
A side-by-side reading of published specifications, limited to specification fields and calculated estimates.
| Specification | MARBERO Portable Power Stations Buy Together MODEL M82(80W | Anker SOLIX C300 Portable Power Station with Adjustable Strap | Specification edge |
|---|---|---|---|
| Battery capacity | 237Wh | 288Wh | Anker SOLIX C300 Portable Power Station with Adjustable Strap |
| Listed weight | 3.2 lbs | 4.1 lbs | MARBERO Portable Power Stations Buy Together MODEL M82(80W |
| Maximum solar input | 60W | 300W | Anker SOLIX C300 Portable Power Station with Adjustable Strap |
| AC output | 300W | 600W | Anker SOLIX C300 Portable Power Station with Adjustable Strap |
| Battery chemistry | NMC/Li-Ion | LiFePO4 | Compare details |
Which one should you buy?
Buy MARBERO Portable Power Stations Buy Together MODEL M82(80W if:
- you prefer the smaller-capacity power profile for shorter sessions
- lower listed weight (3.2 lbs) matters
Buy Anker SOLIX C300 Portable Power Station with Adjustable Strap if:
- you want the larger 288Wh capacity
- you need the higher listed AC output (600W)
Runtime estimate by use case
MARBERO Portable Power Stations Buy Together MODEL M82(80W: 237Wh is positioned here for compact, short-duration power.
Anker SOLIX C300 Portable Power Station with Adjustable Strap: 288Wh is positioned here for compact, short-duration power.
| Device scenario | MARBERO Portable Power Stations Buy Together MODEL M82(80W | Anker SOLIX C300 Portable Power Station with Adjustable Strap |
|---|---|---|
| Phone battery12Wh per recharge | ~16 charges | ~20 charges |
| Camera battery16Wh per recharge | ~12 charges | ~15 charges |
| Laptop battery60Wh per recharge | ~3.4 charges | ~4.1 charges |
| Camp lighting10W continuous draw | ~20 hours | ~24 hours |
Method: nameplate capacity x 0.85 / device watts. The 15% allowance represents typical conversion and system overhead for planning. Actual duration depends on load behavior, temperature, battery state, and power mode.
FAQ
Which is better for weekend travel?
MARBERO Portable Power Stations Buy Together MODEL M82(80W has the portability advantage by listed weight, while Anker SOLIX C300 Portable Power Station with Adjustable Strap provides more stored energy. Pick the constraint that matters most for this use case.
Which model is the stronger fit for longer outage coverage?
Anker SOLIX C300 Portable Power Station with Adjustable Strap has the larger published capacity. Confirm that its 600W AC rating also covers the starting and continuous load of your appliance.
Can MARBERO Portable Power Stations Buy Together MODEL M82(80W run a refrigerator?
Its listed AC output is 300W. If the refrigerator's running and startup demand stay below that limit, the planning estimate at a 60W average load is ~3.4 hours.
Can Anker SOLIX C300 Portable Power Station with Adjustable Strap run a CPAP overnight?
At a 40W planning load with the humidifier off, the estimate is ~6.1 hours. Heated tubing or a humidifier can materially increase consumption.
How are the runtime estimates calculated?
Each estimate uses 85% of the nameplate watt-hour capacity, then divides by the stated device load. It is planning math based on specifications, not a measured result.