Specification and source review ·

Anker SOLIX C300 + Adjustable Strap: Specs Guide

Anker SOLIX C300 + Adjustable Strap
Product image for model identification. Check the selected listing for exact supplied accessories.

PortablePowerDB buying analysis

A carrying strap solves handling, not energy capacity

The strap configuration is useful when the C300 moves with you between short device sessions. Its 288Wh reserve and 300W AC limit still call for an electronics-focused plan. The verified 9.1 lb weight makes handling comparisons more concrete than an undefined portable label.

Choose it when
You need a modest AC reserve and frequent short carries rather than a large campsite appliance battery.
Consider another option when
Your eight-hour laptop/router plan already consumes most of the nameplate capacity before losses and idle draw.
Check before ordering
This accessory configuration was identified from an older cached listing. Confirm the strap is in the currently selected order.
Configuration note: An older cached Amazon source identifies the adjustable-strap configuration. Confirm the currently selected accessories before buying.

Product overview

The AC-equipped SOLIX C300 has 288Wh storage, 300W rated AC output and 100W maximum solar input. USB-C charging and AC output are separate specifications. Its small battery is suited to electronic devices; appliances above 300W are outside its ordinary continuous AC rating.

Specifications and configuration

SpecificationValue
Rated battery capacity288Wh
Continuous AC output300W continuous
Maximum solar input100W
Station weight9.1 lb
Battery chemistryLiFePO4
Product / configurationAnker SOLIX C300 + Adjustable Strap

Base power station only; accessories do not add stored energy. Ratings refer to the cited US product configuration where applicable. Panel nameplate power, charging input, surge/Power Lifting modes and continuous AC output are different specifications.

Calculated here, from the audited inputs

What the specifications mean for your plan

Output-energy budget

207Wh

Calculated after 10% reserve and 80% conversion; AC idle draw still needs deducting.

Eight-hour average load

22W

Calculated with 10% reserve, 80% conversion and 5W assumed AC idle draw.

Rated energy per carried kg

69.8Wh/kg

Nameplate Wh divided by verified station-only mass. Not measured usable energy or a complete-kit weight.

Practical strengths and limitations

PortablePowerDB editorial analysis based on the cited specifications. This is not a hands-on test or a numerical review score.

Strengths

  • 288Wh storage and USB-C options suit small-device charging.
  • A 300W AC inverter supports compatible low-power wall chargers.

Limitations

  • 1200W coffee makers exceed the 300W continuous AC rating.
  • The AC-equipped C300 weighs 9.1 lb; it is not the lighter C300 DC.

Estimated runtime and load compatibility

These examples show sensitivity to assumptions, not a measured performance range: 10% battery reserve, 80–90% conversion efficiency and 0–8W AC idle draw. The lower value uses 80% and 8W; the upper value uses 90% and 0W. Actual performance may fall outside this range. Match voltage, startup demand and individual outlets before relying on an example.

Example AC loadConstant demandCompatibility / modeled runtime
LED lighting10W12.6–23.3 hours (modeled range)
Wi-Fi router15W9.7–15.6 hours (modeled range)
Laptop charger60W3.1–3.9 hours (modeled range)
60W constant load (fridge example)60W3.1–3.9 hours (modeled range)
TV110W1.8–2.1 hours (modeled range)
Coffee maker1200WNot supported: exceeds 300W continuous AC

The 60W fridge row is only a constant-load illustration. It does not model a specific refrigerator's compressor cycles, startup surge or daily consumption. Use measured daily Wh for that appliance.

Three device plans you can audit

Every watt and operating hour below is an example input, not a claim about your appliance. We calculate the required battery as (device Wh ÷ 0.80 + 5W idle × session hours) ÷ 0.90. The peak column assumes all listed running loads overlap; startup surge and per-port limits are separate.

Example plan and inputsDevice energyAll-on running loadRequired rated batteryThis configuration
Travel charging stop
  • Laptop charger: 45W × 2h
  • Phone charging: 12W × 2h
  • Camera charger: 10W × 1h
124Wh67W189Wh99Wh rated-capacity margin. Running watts within total AC rating; startup unchecked.
Four-hour camp evening
  • LED light: 8W × 4h
  • Small fan: 15W × 4h
  • Phone charging: 10W × 2h
112Wh33W178Wh110Wh rated-capacity margin. Running watts within total AC rating; startup unchecked.
Eight-hour connectivity
  • Router: 12W × 8h
  • LED light: 6W × 2h
  • Phone charging: 10W × 2h
128Wh28W222Wh66Wh rated-capacity margin. Running watts within total AC rating; startup unchecked.

The margin is a calculated difference from rated capacity, not measured spare energy. Weather, ageing, low-load cutoff and actual conversion losses can change the result.

Alternatives: what changes in the same calculation?

This configuration and DaranEner NEO300L have the same rated Wh. Under the same assumptions, equal capacity yields the same energy-only budget; output and charging compatibility can still differ.

ConfigurationRated batteryContinuous ACMax solar inputStation weightEight-hour average-load budget
Anker SOLIX C300 + Adjustable Strap This page288Wh300W100W9.1 lb22W AC energy budget
DaranEner NEO300L288Wh350W40W8.2 lb22W AC energy budget
Jackery Explorer 500 v2 + 102W Charger512Wh500W200W12.6 lb42W AC energy budget

The last column uses the same 10% reserve and 80% conversion assumptions, plus 5W idle draw for AC stations and 0W for DC-only. It is an energy calculation, not an outlet rating. Prices, reliability rankings and unverified weights are not part of this comparison.

Solar replenishment: check the bottleneck

For a hypothetical compatible array sized to the station input ceiling, we use the lesser of panel nameplate power and the verified station limit: 100W. This does not establish that a particular wiring layout is electrically compatible.

Four peak-sun-hour illustration
100W × 4h × 0.70 = 280Wh at the charging input
Ideal energy / power lower bound
288Wh ÷ 100W = 2.9 hours

The 70% factor and four peak-sun hours are illustrative assumptions, not a local weather forecast or measured panel yield. Input energy is not the same as stored battery energy. The ideal lower bound ignores charging losses and taper, and is not a full-charge-time claim. Check the actual array and weather before budgeting a daily recharge.

Build your own power plan

Replace our examples with your load measurements and operating hours. Average watts set the energy budget; peak simultaneous running watts screen the total output limit. Startup demand needs a separate check.

Conversion, reserve and idle draw are editable planning assumptions. They are not verified measurements of this model. For refrigerators or cycling loads, divide your measured daily Wh by the planning interval to obtain average watts.

Required rated battery: 133Wh for this 4-hour example. The audited capacity is 288Wh; the energy-only example fits the assumptions. Total output, startup and individual-port compatibility must also be checked.

How we produced the analysis

PortablePowerDB combines the cited model specifications with the original buying judgments and explicit device plans on this page. Calculated results are separate from manufacturer claims. We have not physically tested this unit, and we do not infer measured efficiency, longevity, noise or reliability from the specifications.

Inputs, formulas and limits
  • Scenario output energy = sum of each example's W × operating hours.
  • Required rated Wh = (output Wh ÷ assumed conversion efficiency + idle W × session hours) ÷ (1 − reserve).
  • Modeled runtime = rated Wh × (1 − reserve) ÷ (average output W ÷ efficiency + idle W).
  • Eight-hour average-load budget = max(0, [rated Wh × 0.90 − idle W × 8] × 0.80 ÷ 8).
  • Wh/kg uses nameplate capacity and 1 lb = 0.45359237 kg; it is not measured usable energy density.
  • Scenario defaults: 80% conversion, 10% reserve, 5W AC idle draw or 0W DC-only. Runtime ranges vary conversion from 80–90% and AC idle from 0–8W. These are illustrative sensitivity inputs, not tested limits.
  • Comparisons use audited configurations; separate stations and accessories are not combined unless matching manufacturer evidence supports that configuration.
  • Startup surge, voltage, port-specific sharing, low-load cutoff, ageing, battery management and environmental conditions can invalidate a simple energy estimate. Check the matching manual and measure your own loads.

Sources and verification notes

Sources reviewed on 2026-10-27. Amazon pages can be cached, vary by selected option or return a different ASIN. Only matching product information is used as listing evidence. Manufacturer specifications describe the model; accessories require a separate listing check. Unverified values are identified explicitly.

Noise, idle draw, UPS timing, star ratings, review counts and stock status are not asserted without a matching, traceable source. There is no live Amazon price feed on this page.

Check the selected Amazon configuration

Confirm the model, included accessories, seller, current price and availability on Amazon.

View listing on Amazon

As an Amazon Associate, PortablePowerDB earns from qualifying purchases. This is an affiliate link.