Specification and source review ·

Anker SOLIX F3000: 3072Wh Specs & Home Backup Guide

Anker SOLIX F3000
Product image for model identification. Check the selected listing for exact supplied accessories.

PortablePowerDB buying analysis

3kWh capacity with substantial solar headroom and a heavy chassis

F3000 and HomePower 3000 have the same audited 3072Wh capacity and 3600W AC rating. F3000's 2400W solar-input ceiling is a meaningful difference for a suitable large array, while its 91.5 lb weight creates a different transport proposition.

Choose it when
You have a compatible substantial solar setup and can keep the station near its operating location.
Consider another option when
Your only panel is small or the station must be lifted frequently; compare HomePower 3000's verified lighter weight.
Check before ordering
Do not read combined charging or expansion-system marketing as the single station's AC output. Check what additional equipment a quoted charging figure requires.

Product overview

F3000 has 3072Wh storage and 3600W continuous AC output in the US configuration. Its 6000W combined charging headline applies to a supported charging setup with an expansion battery, rather than the base inverter's continuous output. At 91.5 lb, it is a wheeled backup system rather than light camping luggage.

Specifications and configuration

SpecificationValue
Rated battery capacity3072Wh
Continuous AC output3600W continuous
Maximum solar input2400W
Station weight91.5 lb
Battery chemistryLiFePO4
Product / configurationAnker SOLIX F3000

Base power station only; accessories do not add stored energy. Ratings refer to the cited US product configuration where applicable. Panel nameplate power, charging input, surge/Power Lifting modes and continuous AC output are different specifications.

Calculated here, from the audited inputs

What the specifications mean for your plan

Output-energy budget

2212Wh

Calculated after 10% reserve and 80% conversion; AC idle draw still needs deducting.

Eight-hour average load

272W

Calculated with 10% reserve, 80% conversion and 5W assumed AC idle draw.

Rated energy per carried kg

74.0Wh/kg

Nameplate Wh divided by verified station-only mass. Not measured usable energy or a complete-kit weight.

Practical strengths and limitations

PortablePowerDB editorial analysis based on the cited specifications. This is not a hands-on test or a numerical review score.

Strengths

  • 3072Wh storage and 3600W continuous AC output support larger backup loads.
  • Two solar inputs support up to 2400W total compatible solar charging.

Limitations

  • 6000W combined charging is not 6000W continuous AC output.
  • 91.5 lb weight requires a realistic transport and storage plan.

Estimated runtime and load compatibility

These examples show sensitivity to assumptions, not a measured performance range: 10% battery reserve, 80–90% conversion efficiency and 0–8W AC idle draw. The lower value uses 80% and 8W; the upper value uses 90% and 0W. Actual performance may fall outside this range. Match voltage, startup demand and individual outlets before relying on an example.

Example AC loadConstant demandCompatibility / modeled runtime
LED lighting10W134.9–248.8 hours (modeled range)
Wi-Fi router15W103.4–165.9 hours (modeled range)
Laptop charger60W33.3–41.5 hours (modeled range)
60W constant load (fridge example)60W33.3–41.5 hours (modeled range)
TV110W19.0–22.6 hours (modeled range)
Coffee maker1200W1.8–2.1 hours (modeled range)

The 60W fridge row is only a constant-load illustration. It does not model a specific refrigerator's compressor cycles, startup surge or daily consumption. Use measured daily Wh for that appliance.

Three device plans you can audit

Every watt and operating hour below is an example input, not a claim about your appliance. We calculate the required battery as (device Wh ÷ 0.80 + 5W idle × session hours) ÷ 0.90. The peak column assumes all listed running loads overlap; startup surge and per-port limits are separate.

Example plan and inputsDevice energyAll-on running loadRequired rated batteryThis configuration
Eight-hour electronics reserve
  • Router: 12W × 8h
  • LED lights: 12W × 4h
  • Laptop charger: 45W × 3h
279Wh69W432Wh2640Wh rated-capacity margin. Running watts within total AC rating; startup unchecked.
Twelve-hour mixed essentials
  • Router: 12W × 12h
  • LED lights: 12W × 6h
  • TV: 80W × 4h
  • Laptop charger: 45W × 4h
  • Small fan: 30W × 6h
896Wh179W1311Wh1761Wh rated-capacity margin. Running watts within total AC rating; startup unchecked.
Same plan plus brief cooking
  • Router: 12W × 12h
  • LED lights: 12W × 6h
  • TV: 80W × 4h
  • Laptop charger: 45W × 4h
  • Small fan: 30W × 6h
  • Cooking appliance: 1200W × 0.25h
1196Wh1379W1728Wh1344Wh rated-capacity margin. Running watts within total AC rating; startup unchecked.

The margin is a calculated difference from rated capacity, not measured spare energy. Weather, ageing, low-load cutoff and actual conversion losses can change the result.

Alternatives: what changes in the same calculation?

This configuration and Jackery HomePower 3000 have the same rated Wh. Under the same assumptions, equal capacity yields the same energy-only budget; output and charging compatibility can still differ.

ConfigurationRated batteryContinuous ACMax solar inputStation weightEight-hour average-load budget
Anker SOLIX F3000 This page3072Wh3600W2400W91.5 lb272W AC energy budget
Jackery HomePower 30003072Wh3600W1000W59.5 lb272W AC energy budget
EcoFlow DELTA Pro3600Wh3600W1600W99 lb320W AC energy budget

The last column uses the same 10% reserve and 80% conversion assumptions, plus 5W idle draw for AC stations and 0W for DC-only. It is an energy calculation, not an outlet rating. Prices, reliability rankings and unverified weights are not part of this comparison.

Solar replenishment: check the bottleneck

For a hypothetical compatible array sized to the station input ceiling, we use the lesser of panel nameplate power and the verified station limit: 2400W. This does not establish that a particular wiring layout is electrically compatible.

Four peak-sun-hour illustration
2400W × 4h × 0.70 = 6720Wh at the charging input
Ideal energy / power lower bound
3072Wh ÷ 2400W = 1.3 hours

The 70% factor and four peak-sun hours are illustrative assumptions, not a local weather forecast or measured panel yield. Input energy is not the same as stored battery energy. The ideal lower bound ignores charging losses and taper, and is not a full-charge-time claim. Check the actual array and weather before budgeting a daily recharge.

Build your own power plan

Replace our examples with your load measurements and operating hours. Average watts set the energy budget; peak simultaneous running watts screen the total output limit. Startup demand needs a separate check.

Conversion, reserve and idle draw are editable planning assumptions. They are not verified measurements of this model. For refrigerators or cycling loads, divide your measured daily Wh by the planning interval to obtain average watts.

Required rated battery: 2567Wh for this 12-hour example. The audited capacity is 3072Wh; the energy-only example fits the assumptions. Total output, startup and individual-port compatibility must also be checked.

How we produced the analysis

PortablePowerDB combines the cited model specifications with the original buying judgments and explicit device plans on this page. Calculated results are separate from manufacturer claims. We have not physically tested this unit, and we do not infer measured efficiency, longevity, noise or reliability from the specifications.

Inputs, formulas and limits
  • Scenario output energy = sum of each example's W × operating hours.
  • Required rated Wh = (output Wh ÷ assumed conversion efficiency + idle W × session hours) ÷ (1 − reserve).
  • Modeled runtime = rated Wh × (1 − reserve) ÷ (average output W ÷ efficiency + idle W).
  • Eight-hour average-load budget = max(0, [rated Wh × 0.90 − idle W × 8] × 0.80 ÷ 8).
  • Wh/kg uses nameplate capacity and 1 lb = 0.45359237 kg; it is not measured usable energy density.
  • Scenario defaults: 80% conversion, 10% reserve, 5W AC idle draw or 0W DC-only. Runtime ranges vary conversion from 80–90% and AC idle from 0–8W. These are illustrative sensitivity inputs, not tested limits.
  • Comparisons use audited configurations; separate stations and accessories are not combined unless matching manufacturer evidence supports that configuration.
  • Startup surge, voltage, port-specific sharing, low-load cutoff, ageing, battery management and environmental conditions can invalidate a simple energy estimate. Check the matching manual and measure your own loads.

Sources and verification notes

Sources reviewed on 2026-10-27. Amazon pages can be cached, vary by selected option or return a different ASIN. Only matching product information is used as listing evidence. Manufacturer specifications describe the model; accessories require a separate listing check. Unverified values are identified explicitly.

Noise, idle draw, UPS timing, star ratings, review counts and stock status are not asserted without a matching, traceable source. There is no live Amazon price feed on this page.

Check the selected Amazon configuration

Confirm the model, included accessories, seller, current price and availability on Amazon.

View listing on Amazon

As an Amazon Associate, PortablePowerDB earns from qualifying purchases. This is an affiliate link.