Specification and source review ·

Jackery Explorer 240D: 256Wh DC Power Bank Specs

Jackery Explorer 240D DC Power Bank
Product image for model identification. Check the selected listing for exact supplied accessories.

PortablePowerDB buying analysis

Start with the connector: this battery has no AC inverter

Explorer 240D is a DC power bank. Its 256Wh battery can be relevant for compatible USB/DC equipment, but a low-wattage AC appliance still cannot plug directly into it. Choosing the right output type takes priority over comparing nominal Wh with an AC station.

Choose it when
Every intended device has a compatible DC or USB charging path within the individual port limits.
Consider another option when
Any essential device needs an AC wall socket; compare an AC-equipped C300 or Explorer 500 v2 instead.
Check before ordering
Match voltage, USB charging profile and simultaneous-port limits. The 200W total DC rating is not an individual-port guarantee.

Product overview

Explorer 240D is a 256Wh DC power bank with up to 200W total DC output through its USB ports. It has no AC inverter outlets, so wall-plug appliances cannot be connected directly. Each USB device must match the selected port's charging profile, not just the combined output rating.

Specifications and configuration

SpecificationValue
Rated battery capacity256Wh
Continuous AC outputNo AC outlets (DC only)
Total DC output200W (individual port limits apply)
Maximum solar input100W
Station weight4.85 lb
Battery chemistryLiFePO4
Product / configurationJackery Explorer 240D DC Power Bank

Base power station only; accessories do not add stored energy. Ratings refer to the cited US product configuration where applicable. Panel nameplate power, charging input, surge/Power Lifting modes and continuous AC output are different specifications.

Calculated here, from the audited inputs

What the specifications mean for your plan

Output-energy budget

184Wh

Calculated after 10% reserve and 80% conversion; AC idle draw still needs deducting.

Eight-hour average load

23W

Calculated DC energy budget; individual port compatibility is separate.

Rated energy per carried kg

116.4Wh/kg

Nameplate Wh divided by verified station-only mass. Not measured usable energy or a complete-kit weight.

Practical strengths and limitations

PortablePowerDB editorial analysis based on the cited specifications. This is not a hands-on test or a numerical review score.

Strengths

  • 256Wh storage provides a portable reserve for USB-powered electronics.
  • Up to 200W total DC output supports multiple compatible devices.

Limitations

  • There are no AC outlets for wall-plug appliances.
  • 200W is a combined DC rating; individual ports have their own limits.

Estimated runtime and load compatibility

These examples show sensitivity to assumptions, not a measured performance range: 10% battery reserve, 80–90% conversion efficiency and 0–8W AC idle draw. The lower value uses 80% and 8W; the upper value uses 90% and 0W. Actual performance may fall outside this range. Match voltage, startup demand and individual outlets before relying on an example.

Example AC loadConstant demandCompatibility / modeled runtime
LED lighting10WNot supported: no AC outlets
Wi-Fi router15WNot supported: no AC outlets
Laptop charger60WNot supported: no AC outlets
60W constant load (fridge example)60WNot supported: no AC outlets
TV110WNot supported: no AC outlets
Coffee maker1200WNot supported: no AC outlets

The 60W fridge row is only a constant-load illustration. It does not model a specific refrigerator's compressor cycles, startup surge or daily consumption. Use measured daily Wh for that appliance. This station has no AC outlets; see the DC scenarios below instead.

Three device plans you can audit

Every watt and operating hour below is an example input, not a claim about your appliance. We calculate the required battery as (device Wh ÷ 0.80 + 0W idle × session hours) ÷ 0.90. The peak column assumes all listed running loads overlap; startup surge and per-port limits are separate.

Example plan and inputsDevice energyAll-on running loadRequired rated batteryThis configuration
USB desk, four hours
  • Compatible USB laptop: 30W × 4h
  • Phone charging: 10W × 2h
140Wh40W194Wh62Wh rated-capacity margin. Aggregate DC only; check each port.
DC camp evening
  • Compatible USB light: 5W × 4h
  • USB fan: 8W × 4h
  • Phone charging: 10W × 2h
72Wh23W100Wh156Wh rated-capacity margin. Aggregate DC only; check each port.
USB laptop, eight hours
  • Compatible USB laptop: 30W × 8h
  • Phone charging: 10W × 2h
260Wh40W361WhShort by 105Wh of rated capacity. Aggregate DC only; check each port.

The margin is a calculated difference from rated capacity, not measured spare energy. Weather, ageing, low-load cutoff and actual conversion losses can change the result.

Alternatives: what changes in the same calculation?

Against Anker SOLIX C300 + Adjustable Strap, this configuration has 11.1% less rated energy. That does not by itself establish a better purchase: continuous output, carrying mass and charging limits address different needs.

ConfigurationRated batteryContinuous ACMax solar inputStation weightEight-hour average-load budget
Jackery Explorer 240D DC Power Bank This page256WhNo AC outlets100W4.85 lb23W DC energy budget
Anker SOLIX C300 + Adjustable Strap288Wh300W100W9.1 lb22W AC energy budget
Jackery Explorer 500 v2 + 102W Charger512Wh500W200W12.6 lb42W AC energy budget

The last column uses the same 10% reserve and 80% conversion assumptions, plus 5W idle draw for AC stations and 0W for DC-only. It is an energy calculation, not an outlet rating. Prices, reliability rankings and unverified weights are not part of this comparison.

Solar replenishment: check the bottleneck

For a hypothetical compatible array sized to the station input ceiling, we use the lesser of panel nameplate power and the verified station limit: 100W. This does not establish that a particular wiring layout is electrically compatible.

Four peak-sun-hour illustration
100W × 4h × 0.70 = 280Wh at the charging input
Ideal energy / power lower bound
256Wh ÷ 100W = 2.6 hours

The 70% factor and four peak-sun hours are illustrative assumptions, not a local weather forecast or measured panel yield. Input energy is not the same as stored battery energy. The ideal lower bound ignores charging losses and taper, and is not a full-charge-time claim. Check the actual array and weather before budgeting a daily recharge.

Build your own power plan

Replace our examples with your load measurements and operating hours. Average watts set the energy budget; peak simultaneous running watts screen the total output limit. Startup demand needs a separate check.

Conversion, reserve and idle draw are editable planning assumptions. They are not verified measurements of this model. For refrigerators or cycling loads, divide your measured daily Wh by the planning interval to obtain average watts.

Required rated battery: 167Wh for this 4-hour example. The audited capacity is 256Wh; the energy-only example fits the assumptions. Total output, startup and individual-port compatibility must also be checked.

How we produced the analysis

PortablePowerDB combines the cited model specifications with the original buying judgments and explicit device plans on this page. Calculated results are separate from manufacturer claims. We have not physically tested this unit, and we do not infer measured efficiency, longevity, noise or reliability from the specifications.

Inputs, formulas and limits
  • Scenario output energy = sum of each example's W × operating hours.
  • Required rated Wh = (output Wh ÷ assumed conversion efficiency + idle W × session hours) ÷ (1 − reserve).
  • Modeled runtime = rated Wh × (1 − reserve) ÷ (average output W ÷ efficiency + idle W).
  • Eight-hour average-load budget = max(0, [rated Wh × 0.90 − idle W × 8] × 0.80 ÷ 8).
  • Wh/kg uses nameplate capacity and 1 lb = 0.45359237 kg; it is not measured usable energy density.
  • Scenario defaults: 80% conversion, 10% reserve, 5W AC idle draw or 0W DC-only. Runtime ranges vary conversion from 80–90% and AC idle from 0–8W. These are illustrative sensitivity inputs, not tested limits.
  • Comparisons use audited configurations; separate stations and accessories are not combined unless matching manufacturer evidence supports that configuration.
  • Startup surge, voltage, port-specific sharing, low-load cutoff, ageing, battery management and environmental conditions can invalidate a simple energy estimate. Check the matching manual and measure your own loads.

Sources and verification notes

Sources reviewed on 2026-10-27. Amazon pages can be cached, vary by selected option or return a different ASIN. Only matching product information is used as listing evidence. Manufacturer specifications describe the model; accessories require a separate listing check. Unverified values are identified explicitly.

Noise, idle draw, UPS timing, star ratings, review counts and stock status are not asserted without a matching, traceable source. There is no live Amazon price feed on this page.

Check the selected Amazon configuration

Confirm the model, included accessories, seller, current price and availability on Amazon.

View listing on Amazon

As an Amazon Associate, PortablePowerDB earns from qualifying purchases. This is an affiliate link.